Corsair AX860
WHY WE CHOSE IT
"Every cable comes off at both ends, so the ones this build does not use never enter a case with glass on two sides. A unit rated for full output at 50C with seven years behind it is one fewer variable in a machine running a static-Vcore overclock."
860W of continuous output at 80 PLUS Platinum, fully modular, on a single 71A +12V rail. The 140mm fan stays stopped at low and moderate load, so the unit is silent until the machine asks for something. Rated for 100% output at 50C.
Technical Specifications
| Wattage | 860W continuous |
| Efficiency | 80 PLUS Platinum, up to 92% |
| Modularity | Fully modular, connectors at both ends |
| +12V Rail | Single rail, 71A / 852W |
| Fan | 140mm dual ball bearing, zero-RPM at low and moderate load |
| Warranty | 7 years |
Optimization Notes
When installing the Corsair AX860, ensure you follow our specific configuration guide. Standard installation methods often result in suboptimal performance or higher latency.
Component Procurement & Testing FAQs
Crucial advice on buying used enthusiast PC hardware, silicon binning, and thermal maintenance.
Silicon degradation manifests as instability at stock or mild voltages. Test the CPU by running OCCT CPU / Linpack at stock voltage; if errors occur within 10 minutes, the silicon has experienced degradation.
For used graphics cards (especially OEM or previously mined units), check VRAM junction temperatures and inspect HWInfo64 for "PCIe Bus Errors" (WHEA 17/19).
Replacing dried thermal pads and applying PTM7950 to the GPU core restores used hardware to factory thermal performance.
Always check WHEA errors in HWInfo64 and verify voltage stability on second-hand hardware.